鋁合金實心凸起結構板鍛造成形工藝鋁合金實心凸起結構板鍛造成形工藝Solid boss forming process of plate forging aluminium alloy 以鋁合金筒形件底部實心凸起成形為例，提出采用拉深-鐓擠板鍛造工藝成形中心實心凸起結構，結合有限元模擬技術及工藝實驗方法，比較傳統反擠壓工藝與板鍛造工藝成形實心凸起結構的異同。結果表明：當成形同一凸起高度時，板鍛造成形載荷比反擠壓成形載荷減小一倍左右。板鍛造成形過程中，底部分流面位置先內移后趨于穩定；而在反擠壓成形過程中，底部分流面位置先趨于穩定后外移。凸模與板料上表面的單面潤滑可有效防止底部縮孔缺陷。 A new solid boss plate forging process named compression-drawing method was proposed to form the aluminum alloy sheet. The finite element method with DEFORM-2D and experiments were used to investigate the solid boss forming process. As a result, the forming load of back-extrusion is about two times higher than that of plate forging when the same height boss is acquired. During the solid boss forming, the location of separation flow surface first moves inner side and then remains stable as for plate forging, while it first remains stable and then moves outer side as for back extrusion. Besides, single lubrication between punch and upper side of workpiece can prevent the dimple defect. 全文下載：https://pan.baidu.com/s/1eSPII1k? 作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。 TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges. 獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。 For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.
|
