固溶時效工藝對2297鋁鋰合金微觀組織和力學性能的影響

固溶時效工藝對2297鋁鋰合金微觀組織和力學性能的影響Effect of solid solution and aging process on microstructure and mechanical properties of 2297 Al -Li alloy

通過掃描電鏡(SEM)、透射電鏡(TEM)和拉伸性能測試等方法系統研究固溶和時效工藝對2297鋁鋰合金組織和性能的影響。結果表明：實驗合金較為適宜的固溶制度為((535±5) ℃，1.5 h)，基體中的第二相得到比較充分的溶解，同時抑制再結晶晶粒長大。T6態的主要強化相為T1相和θ′相，T8態的主要強化相為T1相，時效前的預變形可以促進T1相的形成，提高合金的強度峰值，縮短合金達到峰值的時間，160 ℃時效后，未經預變形的合金的強度峰值為392 MPa，到峰時間為48 h，變形量為7%時，合金的強度峰值最高，達到482 MPa，到峰時間為23 h。

The effects of solid solution and aging process on structure and properties of 2297 Al-Li alloy were investigated by SEM, TEM and tensile tests systematically. The results show that the optimum solution treatment is determined as ((535±5) ℃, 1.5 h), and in this case, second phases can be more fully dissolved in the Al matrix and the sizes of recrystallized grains are moderate. The dominant strengthening phases during T6 are T1 phase and θ′ phase. Pre-deforming before aging can promote the nucleation of T1 phase, enhance the peak-aged strength and shorten the time to reach peak. The peak strength of the alloy under T6 state at 160 ℃ is 392 MPa after 48 h. The peak strength of the alloy at 7% pre-deformation is the highest strength which can reach 482 MPa after 23 h.

全文下載：https://pan.baidu.com/s/1i55ZVoT?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO  has  been  a  reliable  partner  and  supplier  of  sophisticated  and  high-quality  semi-finished  products  maed  of  alloys.  In dialogue  with  our  customers,  we  optimise  our  products  to  meet  the  specific  application  requirements.  TXCO  develops  the  best  alloy  material  solutions  for  current  and  future  challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For  more  information  on  the  products  and  services  that  we  supply,  call  us  at  086-021-6786 0205  or  email  us  at   service@sinoav.com.  You  can  also  get  in  touch  on  social  media,  we  are  constantly  active  on  Weixin,  Weibo,  LinkedIn,  Facebook,  Twitter  and  Google+.