不同錳添加劑對Mg-3%Al合金顯微組織的影響

不同錳添加劑對Mg-3%Al合金顯微組織的影響Effects of different manganese additions on microstructure of Mg-3%Al alloy

采用光學和掃描電子顯微鏡研究了3種添加劑Mg-10Mn、Al-20Mn和MnCl2對Mg-3Al%合金組織的影響，利用相提取技術分析不同錳添加劑下Mg-3%Al(質量分數)合金中生成的Al-Mn相，并通過邊邊匹配模型對Al-Mn相和α-Mg間的晶體學錯配度進行計算。結果表明：不同錳添加劑對Mg-3%Al合金晶粒和Al-Mn相類型有顯著影響。Mg-10Mn和Al-20Mn中間合金在Mn加入量為0.3%時，對Mg-3%Al合金晶粒有一定的細化作用，而MnCl2導致晶粒顯著粗化。Mn加入量為0.3%時，添加Mg-10Mn和Al-20Mn中間合金形成的Al-Mn相主要為Al8Mn5；而Mn量增至0.5%時，添加Mg-10Mn和Al-20Mn中間合金形成的Al-Mn相則主要為Al0.89Mn1.11。添加MnCl2時，Mg-3Al%合金中形成的Al-Mn相主要為Al10Mn3。晶體學錯配度計算表明：Al8Mn5能充當Mg-3%Al合金的異質形核核心，但形核效率一般，Al0.89Mn1.11和Al10Mn3不能充當異質形核核心。

The effects of three kinds of manganese additions on microstructure of the Mg-3Al% alloy were studied by optical microstructure and scanning electron microscope. The phase extracting method was utilized to analyze the Al-Mn phases generated in Mg-3Al% alloy modified by different manganese additions. The crystallography misfits between Al-Mn phases and α-Mg were calculated by using edge-to-edge matching model. The results show that different manganese additions can obtain different grain refinement efficiency and Al-Mn phases for the Mg-3Al% alloy. The grain size of the alloy can be slightly refined by Mg-10Mn and Al-20Mn master alloys when Mn addition is 0.3%. However, the grain is obviously coarsened after being modified by MnCl2. The Al-Mn phase generated in the alloy modified by Mg-10Mn and Al-20Mn master alloys mainly contains Al8Mn5 when Mn addition is 0.3%. And the Al-Mn phase turns to be Al0.89Mn1.11 when Mn addition is 0.5%. When the alloy is modified by MnCl2, the Al-Mn phase is mainly Al10Mn3. The crystallography misfit results show that Al8Mn5 can act as crystallize nuclei with impotent effect. Al0.89Mn1.11and Al10Mn3 cannot act as crystallize nuclei. The results correspond with the grain refinement efficiency of Mg-3Al% alloy modified by different Mn additions.

全文下載：https://pan.baidu.com/s/14n8wie8tbk7nasLSaKBOzw?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.