熱鍛對噴射成形7055-T6合金組織和性能的影響

熱鍛對噴射成形7055-T6合金組織和性能的影響Effects of forging on microstructure and mechanical properties of spray forming 7055-T6 alloy

以噴射成形7055-T6鋁合金為對象，借助萬能力學試驗機、電化學工作站、光學顯微鏡(OM)、掃描電鏡(SEM)、透射電鏡(TEM)等手段研究熱鍛對擠壓合金顯微組織與性能的影響。結果表明：擠壓合金的縱向抗拉強度為705 MPa，屈服強度為665 MPa，斷口形貌表現為沿晶斷裂，而鍛造后合金的抗拉強度、屈服強度分別下降了33 MPa和34 MPa，但伸長率、硬度和導電率均有所上升，斷口形貌表現為韌性斷裂；擠壓合金晶粒較均勻，組織有方向性，但熱鍛后合金部分晶粒長大合并，部分晶粒破碎；合金晶界析出相中的主要元素含量均比基體高，且熱鍛后合金晶界析出相中的Mg、Zn元素含量降低，Cu元素含量升高；合金經峰值時效后，晶內GP區和η′析出相為主，晶界析出相近似連續分布，導致合金耐蝕性不好；鍛造后晶界和晶內析出相均長大粗化，使得合金強度下降，耐蝕性提高。

High strength 7055-T6 aluminum alloys were produced by spray forming. The microstructures and properties of alloy after forging and extrusion were investigated using tensile test, electrochemical workstation, optical microscope(OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM). The results indicate that the tensile strength of the extruded alloy can reach 705 MPa, the yield strength can reach to 665 MPa, and the extruded alloys exhibit an intergranular fracture, the tensile strength and yield strength of the forged alloy decrease by 33 MPa and 37 MPa, respectively, but the elongation, electrical conductivity and hardness all have increased, and the forged alloys exhibit a ductile fracture. The extruded alloys feature fine and homogeneous, the grains are elongated along extrusion, but some grains of forged alloys are broken, and some grains grow up; and the grain boundary precipitates of extruded alloys continuous distribution, the distribution of precipitated phases in grain boundary is dispersive and homogeneous, which leads to a bad corrosion resistance; the precipitated phases of forged alloys have coarsened, which reduce the strength properties but increase the corrosion–resistance.

全文下載：https://pan.baidu.com/s/1uOhB---t_ZKmRnO1MIKxGw?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.