鎂合金表面MgF2/HA復合涂層的體外降解性能

鎂合金表面MgF2/HA復合涂層的體外降解性能Degradation behavior of MgF2/HA composite coating on magnesium alloy in vitro

為改善鎂合金的耐蝕性和生物相容性，利用化學處理和電化學沉積法在鎂合金AZ31表面制備MgF2/HA復合涂層。采用Hank’s仿生溶液中浸泡和電化學阻抗(EIS)的方法，結合浸泡過程中涂層EIS譜和表面形貌成分的變化，研究MgF2/HA涂層的體外降解行為。結果表明：在Hank’s仿生溶液浸泡過程中，涂層電化學阻抗譜的高頻容抗弧明顯減小，涂層電阻隨浸泡時間而降低。浸泡至5 d時，出現感抗弧，涂層表面區域產生腐蝕孔核。浸泡至8 d時，鎂合金基體發生點蝕，點蝕產生的腐蝕產物在孔中堆積形成胞狀突起。浸泡至12 d時，Cl-滲透至鎂合金基體，涂層表面形成MgCl2結晶。浸泡過程中，表面涂層未發生脫落和明顯的溶解，降解以溶液滲透至基體，然后發生局部點蝕為主。

In order to improve the corrosion resistance and biocompatibility of magnesium alloys, MgF2/HA composite coatings were prepared on AZ31 magnesium alloy by way of chemical treatment and electrochemical deposition. The evolution of electrochemical impedance spectroscopy (EIS) behavior, as well as the change of the micrograph and chemical composition of the MgF2/HA coating in Hank’s solutions were used to study the degradation process. The results indicate that, during the immersion in Hank’s solutions，the capacitance loop at high frequency decreases obviously, the resistance of the composite coating reduces. The existence of inductance loop of the 5 d-soaked specimen indicates the nucleation of corrosion pits is formed on coated AZ31 alloy. Soak to 8 d, the pitting corrosion occurs, the corrosion products accumulate and form swelling prominence．Soak to 12 d，the Cl- permeates to substrate and MgCl2 crystals form on the coating surface. During the soaking, the surface coating does not fall off and the coating has not obvious dissolved. The degradation happens when the ions in solution permeate to the Mg substrate, and then the localized pitting corrosion occurs.

全文下載：https://pan.baidu.com/s/1m7XZIiaxeqTeLyFAYTiNdg?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.