有序化熱處理對Ni-Mn-Ga-Fe 形狀記憶纖維的影響

有序化熱處理對Ni-Mn-Ga-Fe 形狀記憶纖維的影響Effect of chemical ordering annealing on Ni-Mn-Ga-Fe shape memory microwires

通過熔體抽拉法制備了直徑為40~50 μm、長度為5~10 cm的多晶Ni50Mn25Ga25-xFex (x=1, 2, 3, 4, 5, 6, 摩爾分?jǐn)?shù)，%)纖維，對制備態纖維采用步進式有序化后熱處理，利用場發射掃描電子顯微鏡、透射電子顯微鏡、X射線衍射對其微觀組織和成分進行表征，使用差示掃描量熱分析儀和動態機械拉伸儀測試其相變行為和力學性能。結果表明：熱處理后隨著Fe摻雜的增加，纖維實現了從奧氏體相到馬氏體相的轉變，熱處理態纖維具有不同的晶體類型，馬氏體孿晶界更為平直、清晰，原子有序度明顯提高。熱處理可以提高相變溫度，減小相變滯后，使馬氏體相變更容易進行，提高了抗拉強度和斷裂應變。綜合分析闡明了Fe摻雜及有序化熱處理影響微觀結構、相變行為和力學性能的微觀機制。

The polycrystalline Ni50Mn25Ga25-xFex (x=1, 2, 3, 4, 5, 6, mole fraction, %) microwires with diameter of 40- 50 μm and length of 5-10 cm were prepared by meld extraction technique. A step-wise chemical ordering annealing heat treatment was carried out. The microstructure and composition of microwires were characterized using field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD). The phase transition behavior and mechanical properties were tested using differential scanning calorimetry (DSC) and dynamic mechanical analyzer (DMA). The results show that, after heat treatment along with the increase of the Fe doped, the microwires have realized from the austenite phase to the martensite phase transformation. The annealed microwires have different crystal types, the martensite exhibits straight clear twin boundary, and the atomic ordering increases. The annealing increases the transformation temperature and decreases the transformation hysteresis, and makes martensite transition easier. The annealing improves the tensile strength and breaking strain. Comprehensive analysis illustrates that the microcosmic mechanisms of Fe doping and ordering heat treatment affect the microstructure, phase transition behavior and mechanical properties.

全文下載：https://pan.baidu.com/s/1yeruzSQTHvhtQB5plq7HRg?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.