擠壓態Mg-Dy-Cu合金板材的顯微組織及時效硬化行為

擠壓態Mg-Dy-Cu合金板材的顯微組織及時效硬化行為Microstructures and age-hardening behavior of extruded Mg-Dy-Cu alloy sheet

采用X射線衍射儀、金相顯微鏡、掃描電鏡、透射電鏡及顯微硬度計等研究擠壓Mg-2Dy-0.5Cu(摩爾分?jǐn)?shù)，%)合金板材的顯微組織及時效硬化行為。結果表明：鑄態合金主要由α-Mg枝晶、分布在枝晶間片層狀的18R-LPSO相以及少量不規則的MgDy3顆粒相組成。擠壓后，合金發生動態再結晶，粗大的LPSO相碎化并沿擠壓方向排列，少量細小片層狀的14H-LPSO相在再結晶的α-Mg晶粒內析出。隨著時效時間的增加，14H-LPSO相的體積分?jǐn)?shù)逐漸增加并粗化，合金的硬度增加且在72 h達到峰值。合金峰值硬度的產生主要歸結為高體積分?jǐn)?shù)14H-LPSO相的析出強化。

The microstructure and age-hardening behavior of an extruded Mg-2Dy-0.5Cu (mole fraction, %) alloy sheet were investigated by X-ray diffractometer, optical microscopy, scanning electron microscopy, transmission electron microscopy and microlardness tester. The microstructures of the as-cast alloy mainly consist of α-Mg dendrites, the 18R-long period stacking ordered (LPSO) phase distributes among α-Mg dendrites and a small number of MgDy3 particle phases. After extrusion, dynamic recrystallization (DRX) occurs and fine microstructure is obtained during extrusion. Some coarse 18R-LPSO phases are crushed and distributed along the hot extrusion direction. Moreover, few fine lamellar 14H-LPSO phases precipitate in DRX α-Mg grains. With the increase of aging time, the volume fraction of 14H-LPSO phase gradually increases and the phases coarsen, the hardness of the alloy increases and reaches a peak at 72 h, which is mainly attributed to the precipitation strengthening of the high volume fraction of 14H-LPSO phase.

全文下載：https://pan.baidu.com/s/1vy1nBlhg9iGkmun5mDDqXw?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.