激光選區熔化用AlSi10Mg粉末顯微組織與性能

激光選區熔化用AlSi10Mg粉末顯微組織與性能Microstructure and Properties of AlSi10Mg Powder for Selective Laser Melting

采用超音速氣體霧化制備AlSi10Mg粉末，粉末經分級后通過激光選區熔化制成試塊。利用金相顯微鏡、掃描電子顯微鏡、X射線衍射儀研究粉末和試塊的微觀組織、組成相及演變情況，通過拉伸實驗測試試塊的室溫拉伸性能。結果表明，AlSi10Mg粉末粒徑分布符合激光選區熔化工藝要求，粉末呈球形或類球形。粉末組織細小均勻，主要由α（Al）基體和（α+Si）共晶組成。試塊熔池形貌清晰可見，組織均勻、致密，其致密度達到99.5%；該組織中僅存在α（Al）和極少量Si相，幾乎所有合金元素均固溶于Al基體中。經室溫拉伸性能測試，試塊的抗拉強度達到了442 MPa。

The AlSi10Mg powder was prepared by supersonic gas atomization. After classified, the powder was fabricated into block by selective laser melting (SLM). The microstructure, phase, and evolutions of powder and block were investigated by optical microscope, scanning electron microscope and X-Ray Diffraction. The tensile properties of SLM block were tested by tensile experiments at room temperature. The results show that the size distribution of AlSi10Mg powder after classified can meet the requirements of SLM technology. The powder always is spherical and spherical-like. Meanwhile, the microstructure of powders is fine and uniform, which contain α(Al) matrix and (α+Si) eutectic. In addition, the melt pool boundaries of SLM block are legible. The microstructure is also uniform and densified, the relative density approaches to 99.5%. On the other hand, only α(Al) and few Silicon phase are detected in this condition, due to the most alloying elements are dissolved in α(Al) matrix. At room temperature, the ultimate tensile strength of SLM block reaches up to 442 MPa.

全文下載：https://pan.baidu.com/s/1htFTCZa?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.