激光近凈成形SS316/Ni20復合材料的開裂機理

激光近凈成形SS316/Ni20復合材料的開裂機理Cracking mechanism of SS316/Ni20 composite fabricated by laser engineered net shaping

采用激光近凈成形制備梯度材料時異種材料的混合易產生缺陷，嚴重制約了梯度材料的應用。采用激光近凈成形技術制備不同成分比的SS316/Ni20復合材料薄壁結構，并利用OM、SEM、XRD、EDS等檢測手段研究不同成分比時復合材料的顯微組織、相組成及元素分布。對裂紋的微觀形貌、裂紋斷面的元素分布進行分析。結果表明：在給定工藝條件下，SS316質量分?jǐn)?shù)為100%、20%~0時成形件形貌較好，無裂紋缺陷，SS316質量比在90%~30%時成形件發生開裂。裂紋沿晶界擴展，裂紋斷面上晶粒清晰可辨，屬于熱裂紋范疇。成形件開裂主要原因是凝固過程中雜質元素在晶界偏析形成連續的液膜，以及硬質相在晶界上的連續析出，降低晶粒間的結合強度，使其在殘余應力作用下產生開裂。

The mixed gradient materials produced by the laser engineered net shaping (LENS) process are vulnerable, which restricts seriously the application of these materials. Different proportions SS316/Ni20 composite thin-walled structures were prepared using LENSTM and the microstructure, phase composition and distribution of elements under different compositions were studied by OM, SEM, XRD and EDS. Under the given process conditions, the results show that when SS316 mass fractions are 100%, 20%-0, the components appear well without crack. While, when the mass fractions ranges from 90% to 30%, the components crack. The morphology analysis of crack and elements distribution of the crack surface indicates that the cracks propagate along grain boundaries and the grains on the crack surface are visible, the cracking belongs to the hot crack domain. The main reason of cracking is the grain boundary segregation of impurity elements during solidification and hard phase continuous precipitation on the grain boundary, which reduces the bonding strength between the grains. It is prone to cracking under residual stress.

全文下載：https://pan.baidu.com/s/1jJJmcUM

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.