連續柱狀晶組織純銅室溫超延展變形機理

連續柱狀晶組織純銅室溫超延展變形機理Extreme plastic extensibility mechanism of continuous columnar-grained copper at ambient temperature

通過下引式連續定向凝固設備，調控合理的工藝參數制備出表面光潔、單一á100？取向的柱狀晶銅桿。然后經室溫拉拔(不經過中間熱處理)，表現出超延展變形。通過組織觀察和性能分析，發現其塑性變形可以分為3個階段：一般硬化階段(ε≤4.13)，低硬化速率階段(4.13≤ε≤10.16)，部分亞微米等軸晶粒形成階段(ε≥10.16)。每個階段的塑性變形行為各有不同，各有其特點。研究結果全面地概括連續柱狀晶組織銅桿在室溫拉拔過程中的變形機理，同時也為超細銅絲的制備提供必要的理論依據。

The smooth surface and single á100？ oriented columnar-grained copper rods were prepared by downward continuous unidirectional solidification equipments with reasonable process parameters, then, the copper rods were drawn at ambient temperature (without intermediate heat treatment), which exhibits the extreme plastic extensibility. The results show that the plastic deformation of the copper rod can be divided into three different stages by observation of its microstructure and properties, general hardening stage (ε≤4.13), low hardening rate stage (4.13≤ε≤10.16). Some submicron equiaxed grain forming stage (ε≥10.16). Each stage of the plastic deformation behavior is different and has its own characteristics. Not only the drawing mechanism of continuous columnar-grained copper rods at ambient temperature was comprehensively summarized, but also the necessary theoretical basis for the preparation of ultrafine copper wire was provided.

全文下載：https://pan.baidu.com/s/1dGdyLMD?

作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，通項公司擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，通項公司致力于為客戶提供最佳的金屬材料解決方案。

TXCO has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. TXCO develops the best alloy material solutions for current and future challenges.

獲取更多我們供應的產品和服務信息，請致電086-021-6786 0205或發電子郵件service@sinoav.com聯系我們，您也可以通過微信，微博，領英，臉書，推特和谷歌+與我們互動。

For more information on the products and services that we supply, call us at 086-021-6786 0205 or email us at service@sinoav.com. You can also get in touch on social media, we are constantly active on Weixin, Weibo, LinkedIn, Facebook, Twitter and Google+.