碳鋼在模擬海洋工業大氣環境中初期腐蝕行為研究

碳鋼在模擬海洋工業大氣環境中初期腐蝕行為研究A Study on the Initial Corrosion Behavior of CarbonSteel Exposed to A Simulated Coastal-Industrial Atmosphere

本文采用失重分析、X射線衍射分析及掃描電鏡測試分析方法對碳鋼Q235在模擬海洋工業大氣環境中的初期腐蝕歷程和機理開展深入研究，并著重探究了不同比例SO2和Cl-的協同效應對碳鋼初期腐蝕行為機制的影響。結果表明，碳鋼Q235在模擬海洋工業大氣環境中的初期腐蝕呈現由加速過程向減速過程轉化的特點，且加速過程的腐蝕動力學仍遵循冪函數規律D=Atn；腐蝕24h后，腐蝕產物呈現雙層結構,即疏松的外層和相對致密的內層。SO2和Cl-的協同效應會加速碳鋼的腐蝕，但二者比例的變化對碳鋼腐蝕失重影響并不明顯，也沒有改變腐蝕產物成分，SO2的存在促使碳鋼腐蝕形態由局部腐蝕向均勻腐蝕轉變。

The initial corrosion behavior of Q235 carbon steel exposed to a simulated coastal-industrial atmosphere has been studied by weight loss, X-ray diffraction (XRD), and scanning electron microscopy (SEM). In addition, the effect of the synergism of SO2 and Cl- (in different proportion) on the early corrosion behavior of Q235 carbon steel has also been investigated. The results indicate that the initial corrosion behavior of carbon steel exposed to a simulated coastal-industrial atmosphere presented a transition from corrosion acceleration to deceleration, and the kinetics of accelerated corrosion process followed the empirical equation D=Atn. A double-layered corrosion product was formed on the surface of carbon steel after 24h: the loose outer layer and relative dense inner layer; the synergistic effect between SO2 and Cl- accelerated the corrosion of carbon steel. However, the change in the ratio of SO2 and Cl- had no significant effect on the corrosion loss of carbon steel, and had not changed the composition of corrosion products formed on carbon steel surface. SO2 played a role in promoting the corrosion morphology of carbon steel from localized corrosion to uniform corrosion.

全文下載：http://pan.baidu.com/s/1cfawBs